Jual AL165 Aluminized Protective Gloves

Description :


Five-Finger Type; Length: 16″
Features  :
BLUE EAGLE Aluminized Protection Gloves  
Item No.: AL165
Material: Woven fabric of aramid fiber blend over a fiberglass core yarn, aluminum laminate 1 side.
Size: 11 (5-finger type)
Length: 16″
Features: 
• The BLUE EAGLE ® aluminized protective gloves AL145, AL165 and AL205 provide user five fields of fire/heat protections, including burning, contact heat, convective heat, radiant heat and small molten metal splashes.
• Three sizes are avaiable.
AL145 (14″ or 36 cm), AL165 (16″ or 40 cm), AL205 (20″ or 50 cm)
• Complied with CE EN407 and EN388.

SKU: 9850 Kategori:

Deskripsi

** EN 407 – Protective gloves against thermal risks **


1. Burning behaviour (Performance level 4)

The burner is placed below the glove so that it is in a plane with the vertical middle line of the glove or the middle finger and is perpendicular to the surface of the glove. The burner is mounted at an angle of 30 degrees to the vertical. The distance between the tip of the burner and the lower edge of the glove or the middle finger shall be 20 mm.

Glove shall be tested for each ignition time, i.e. 3 s and 15 s. The after flame time and after glow time shall be recorded for each ignition time.

Performance

Level

After flame time

(sec)

After glow time

(sec)

1 < 20 No requirement
2 < 10 < 120
3 < 3 < 25
4 < 2 < 5

 

2. Contact heat (Performance level 2)
Apply a force on the glove to contact a heated surface with certain temperature (100°C, 250°C, 350°C, or 500°C). Measure and record how long will the temperature on the other side of the glove raise 10°C, i.e. measure and record how long will user’s hand raise 10°C). At each level, the threshold time must be more than 15 s.
Performance

Level

Contact temperature

(°C)

Threshold time

(sec)

1 100 > 15
2 250 > 15
3 350 > 15
4 500 >  15

 

3. Convective heat (Performance level 3)

Position the glove sample on a support stand and place a burner below it. Ignite the burner, measure and record how long will the temperature on the other side of the glove raise 24°C, i.e. measure and record how long will user’s hand raise 24°C

Performance

Level

Heat transfer index HTI

(sec)

1 > 4
2 > 7
3 > 10
4 > 18
4. Radiant heat (Performance level 4)
Position the glove sample on a support stand and place a radiant heat source in front of it. After open the radiant heat source, measure and record how long will the temperature on the other side of the glove raise 24°C, i.e. measure and record how long will user’s hand raise 24°C
Performance

Level

Heat transfer T24

(sec)

1 > 7
2 > 20
3 > 50
4 > 95

 

5. Small splashes of molten metal (Performance level 3)
Let molten metal drops on the glove. Measure and record how many drops will the temperature on the other side of the glove raise 40°C, i.e. measure and record how long will user’s hand raise 40°C
Performance

Level

Number of molten metal droplets
1 > 10
2 > 15
3 > 25
4 > 35

 

** EN 388 – Protective gloves against mechanical risks **


1. Abrasion resistance (Performance level 4)

2. Blade cut resistance (Performance level 5)
3. Tear resistance (Performance level 4)
4. Puncture resistance (Performance level 2)
Test Level 1 Level 2 Level 3 Level 4 Level 5
Abrasion resistance(number of cycles) 100 500 2000 8000
Blade cut resistance (index) 1.2 2.5 5.0 10.0 20.0
Tear resistance (N) 10 25 50 75
Puncture resistance (N) 20 60 100 150

Ulasan

Belum ada ulasan.

Be the first to review “Jual AL165 Aluminized Protective Gloves”

Alamat email Anda tidak akan dipublikasikan.